



Camião basculante novo Iveco Daily 70C18 Gasóleo grua
Urgente- 5 km
- 7 T
- 4x2
- Gdańsk
- Iveco Euro 6
- Iveco
Informações principais
|
|
---|---|
Ref. site : | 10664437 |
Carroçaria | Basculante |
Marca | Iveco |
Gama (marca : Iveco) | Daily |
Modelo | 70C18 |
Estado | Novo |
Data da primeira matrícula | -- |
País | POLÓNIA |
Construtor | Iveco |
Estado do material |
|
---|---|
Energia | Gasóleo |
Informações complementares Iveco 70C18 |
|
---|---|
| |
Caixa de velocidades | Caixa manual |
Pneus |
|
---|---|
Estado e dimensões dos pneus | - |
Tonelagem |
|
---|---|
Peso total carregado | 7 T |
Dimensões da carroçaria |
|
---|---|
Largura interna da carroçaria | 2.25 metros |
Comprimento interno da carroçaria | 3.62 metros |
Altura interna da carroçaria | 0.6 metros |
Características Iveco Daily - Grua |
|
---|---|
Quilometragem | 5 km |
Condução | Volante à esquerda |
Normas Euro | Iveco Euro 6 |
Eixos | 4x2 |
País (gama) | POLÓNIA |
Capacidade do tanque | 115 L |
Grua Auxiliar |
|
---|---|
| |
Capacidade de carga | 2700 Kg |
Capacidade de elevação no final da lança | 1.12 T |
Raio de trabalho | 3.6 metros |
Equipamento Camião Iveco |
---|
|
Dimensões |
|
---|---|
Superfícíe | 8.15 m² |
Volume | 5 m³ |
Motor |
|
---|---|
Potência | 176 CV |
Cilindrada | 2998 cm3 |
Equipamento da cabina |
|
---|---|
|
Observações |
---|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Consultar todos
|
Observações |
---|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Informações principais
|
|
---|---|
Ref. site : | 10664437 |
Carroçaria | Basculante |
Marca | Iveco |
Gama (marca : Iveco) | Daily |
Modelo | 70C18 |
Estado | Novo |
Data da primeira matrícula | -- |
País | POLÓNIA |
Construtor | Iveco |
Estado do material |
|
---|---|
Energia | Gasóleo |
Informações complementares Iveco 70C18 |
|
---|---|
| |
Caixa de velocidades | Caixa manual |
Pneus |
|
---|---|
Estado e dimensões dos pneus | - |
Tonelagem |
|
---|---|
Peso total carregado | 7 T |
Dimensões da carroçaria |
|
---|---|
Largura interna da carroçaria | 2.25 metros |
Comprimento interno da carroçaria | 3.62 metros |
Altura interna da carroçaria | 0.6 metros |
Características Iveco Daily - Grua |
|
---|---|
Quilometragem | 5 km |
Condução | Volante à esquerda |
Normas Euro | Iveco Euro 6 |
Eixos | 4x2 |
País (gama) | POLÓNIA |
Capacidade do tanque | 115 L |
Grua Auxiliar |
|
---|---|
| |
Capacidade de carga | 2700 Kg |
Capacidade de elevação no final da lança | 1.12 T |
Raio de trabalho | 3.6 metros |
Equipamento Camião Iveco |
---|
|
Dimensões |
|
---|---|
Superfícíe | 8.15 m² |
Volume | 5 m³ |
Motor |
|
---|---|
Potência | 176 CV |
Cilindrada | 2998 cm3 |
Equipamento da cabina |
|
---|---|
|
Observações |
---|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Consultar todos
|
Observações |
---|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |

Camião basculante Volvo FMX 460 Kipper * TOPZUSTAND / 8x4 !

Camião basculante Renault R30 KERAX 430

Camião basculante DAF CF 1460



Camião basculante cerealífera Mercedes Actros 3541
