Camião usado volvo fh 500 - falkom faw 25.000 - !! viewing by appointment only !! gasóleo

Preço de venda :

Preço sob consulta

Voltar a pesquisa

Camião Volvo 500 - FALKOM FAW 25.000 - !!...

Ref: HE-NE

Camião usado Volvo FH 500 - FALKOM FAW 25.000 - !! Viewing by appointment only !! Gasóleo

130 000 km
37 T
03/01/2020
6004 RM Weert
Volvo Euro 6
Volvo

Informações principais
Ref. cliente :	HE-NE
Ref. site :	11304821
Carroçaria	--
Marca	Volvo
Gama (marca : Volvo)	FH
Modelo	500 - FALKOM FAW 25.000 - !! Viewing by appointment only !!
Estado	Usados
Data da primeira matrícula	03/01/2020
País	PAÍSES BAIXOS
Construtor	Volvo

Informações complementares Volvo 500 - FALKOM FAW...
Data da última inspeção técnica	03/01/2026
Data de conformidade do veículo	03/01/2027
Retarder

Infos cabina FH
Comprimento cabina	Curta

Caixa de velocidades e transmissão
Caixa de velocidades	Caixa automática
Precisões caixa de velocidade	Automaat

Tonelagem
Carga útil	13.28 T
Tara	23.73 T
Peso total carregado	37 T

Equipamento Camião Volvo
Suspenção pneumática - ar Suspensão Mecânica ABS Regulador de velocidade

Características Volvo FH
Quilometragem	130 000 km
Normas Euro	Volvo Euro 6
País (gama)	PAÍSES BAIXOS

Estado do material
Energia	Gasóleo

Pneus
Estado e dimensões dos pneus	22.5

Suspenção / Eixos
Eixos	8x4
Distâncias entre os eixos	5.6 metros

Motor
Potência	509 CV
Potência do motor	375 kW
Cilindrada	12777 cm3
Número de cilindros	6

Equipamento da cabina
Ar condicionado Fecho de portas centralizado

Observações
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune
Consultar todos

Observações

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

Falkom wrecker installation type FAW 25.000
- One main arm.
- A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m.
- A fully hydraulic installation consisting of:
- hoses
- couplings
- pipes
- 8-function valve block
- Two double-acting lifting cylinders take care of the up and down movement of the main arm.
- The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d.
- The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004).
- 2 anchors model working independently of each other standard.
- A lift beam (100 x 100 mm tube).
- Three sets of fork holders.
- 4 sets of V forks.
- 1 Set of chain forks.
- 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks).
- Set of Scania claws with mounting brackets on the lift beam.
- Set of air suspension forks.
- 1 bus frame.
- Tow bar mounted.
- Shovel and broom mounted.
- Oil tank.
- Pulling device with trawler in combination with a semi-trailer link.
- Supported drawbar coupling support.
- Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel.
- Hydraulic double pump.
- Radio remote control for all functions, excluding anchor shovels
- Complete installation is stacked / metallized.
- Built according to CE guidelines.
- Assembly of the air hands and electrical connections of the truck at the rear in the body.
- Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis.
- LED light bar mounted on the flyer.
- Lighting control switches mounted in the control box and in the cabin.
- LED flash lamps mounted at the rear.
- 6 work lights mounted (under the flyer, high at the rear and low).
- LED lamps mounted on the corners of the enclosure.
- Starting aid 12/24 volts.
- Air reel mounted.
- Spray the installation in finish.
- 7-wire electrical cable reel installed.
- Container for counterweight mounted behind the cab.
- Base plate for lateral stability (standard legs only)
- 2 fork raisers
- 2 pieces of anchor plates for Wheel chocks
- Two WLL 15 tonne folding discs
- European approved buffer beam at the rear.
- Pulling device with pin 40, 50 and 60 mm
- 2 models towing eyes.
- RDW inspection and, if necessary, TüV.
- Ballast under the bumper.

More information

Cab: Globetrotter, single
Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering
Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering
Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction
Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction
Registration number: 28-BPD-3

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

Kabine: Globetrotter, einfach
Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt
Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt
Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen
Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen
Kennzeichen: 28-BPD-3

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Cabine: Globetrotter, enkel
As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend
As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend
As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie
As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie
Kenteken: 28-BPD-3

Référence parc : 323949,
Année de construction : 2020,
Nombre de roues motrices : 4,
Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5,
Nombre d'essieux : 4,
Suspension d'essieu,
Stores,
Capacité : 13tonnes,
Capacité maximum : 13tonnes,
Prise de force,
Visière pare-soleil,
Charge utile : 13.275tonnes,
Autoradio,
Nombre de portes : 2,
Couchette chauffeur,
Poids : 23.725kg,
Frein à disque,
Vitres électriques,
Capacité de chargement : 13275kg,
Tempomat,
Cruise control,
Vitres électriques,
Type d'intérieur : Autre,
Type de pneus : Jumelés,
Couleur : Jaune

Consultar todos

Observações
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune

Observações

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

More information

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Histórico do veículo

Verificar o histórico do veículo com

Preço de venda

Preço sob consulta

Informações principais
Ref. cliente :	HE-NE
Ref. site :	11304821
Carroçaria	--
Marca	Volvo
Gama (marca : Volvo)	FH
Modelo	500 - FALKOM FAW 25.000 - !! Viewing by appointment only !!
Estado	Usados
Data da primeira matrícula	03/01/2020
País	PAÍSES BAIXOS
Construtor	Volvo

Informações complementares Volvo 500 - FALKOM FAW...
Data da última inspeção técnica	03/01/2026
Data de conformidade do veículo	03/01/2027
Retarder

Infos cabina FH
Comprimento cabina	Curta

Caixa de velocidades e transmissão
Caixa de velocidades	Caixa automática
Precisões caixa de velocidade	Automaat

Tonelagem
Carga útil	13.28 T
Tara	23.73 T
Peso total carregado	37 T

Equipamento Camião Volvo
Suspenção pneumática - ar Suspensão Mecânica ABS Regulador de velocidade

Características Volvo FH
Quilometragem	130 000 km
Normas Euro	Volvo Euro 6
País (gama)	PAÍSES BAIXOS

Estado do material
Energia	Gasóleo

Pneus
Estado e dimensões dos pneus	22.5

Suspenção / Eixos
Eixos	8x4
Distâncias entre os eixos	5.6 metros

Motor
Potência	509 CV
Potência do motor	375 kW
Cilindrada	12777 cm3
Número de cilindros	6

Equipamento da cabina
Ar condicionado Fecho de portas centralizado

Observações
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune
Consultar todos

Observações

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

More information

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Consultar todos

Observações
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune

Observações

🇬🇧 Information in English:
Additional options and accessories