Empilhador a gás novo Dragon Machinery LPG Forklift CPQD30

3.0T gasoline forklift, 3.0T LPG forklift, 3.0T propane forklift, 3T dual-fuel forklift truck, 3T LPG forklift truck, 3T gasoline forklift truck, 3T propane forklift truck, 3 ton LPG fork lift, 3 ton propane fork lift, 3 ton gasoline/LPG forklift, 3 ton LPG forklift truck, 3 ton gasoline forklift truck, 3 ton dual-fuel forklift, 3 ton LPG forklift, 3 ton gasoline forklift, 3.0T gas forklift, gasoline forklift capacity 3000kg, LPG forklift capacity 3000kg, propane forklift capacity 3000kg, 3.0 ton capacity gasoline forklift truck, 3.0 ton capacity LPG forklift truck, 3.0 ton propane forklift truck, 3.0T gasoline fork lift truck, 3.0T LPG fork lift truck, 3.0T propane fork lift truck, 3.0T dual-fuel fork lift truck, 3.0T gas fork lift truck, 3.0T counterbalanced gasoline forklift truck, 3.0 ton counterbalance LPG forklift, 3 ton counterbalanced dual-fuel forklift, 3T counterbalance propane forklift

Features:
1. Good Power Performance Engine;
The engine has good power performance, runs stably and has features such as low noise, low vibration and low fuel consumption, etc.
2. Low Carbon Emission;
The fuel of LPG achieves low carbon emission, which plays an active role in environmental protection.
3. Precise Design and Stringent Test;
All parts for the “fuel element” adopt the OEM products from IMPCO USA, so the performance is guaranteed by precise design and stringent test. Meanwhile, because LPG has higher ignition point than gasoline and bigger gasification potential, that is having self-cooling function, therefore the safety is greatly reinforced.
4. Easy, Reliable and Comfortable Operating;
Using gasoline or LPG as the fuel, the conversion between these two fuels is easy and reliable, and the operation is comfortable.
5. 24 /7 Work;
Equipped with big capacity fuel/gas tank, this forklift is fit for 24/7 work.

Technical Specifications:
Power Type: Gasoline/LPG
Rated Capacity: 3000kg
Load Center: 500mm
Lifting Height: 3000mm
Mast Tilt Angel (F/R): 6/12Deg
Front Overhang: 485mm
Wheel Base: 1700mm
Wheel Tread (F/R): 1000/980mm
Dead Weight: 4270kg
Free Lift Height: 165mm
Min. Turning Radius: 2410mm
Min. Ground Clearance - Under Mast: 120mm
Min. Ground Clearance - Wheelbase Center: 160mm
Service Brake: Hydraulic-Foot Pedal
Parking Brake: Mechanical-Hand Lever
Lifting Speed (full-load): 360mm/s
Lowering Speed: Full-load < 600mm/s, No-load > 300mm/s
Travel Speed (no-load): 19km/h
Max. Gradeability (full-load): 20%
Max. Tractive Force (full-load/no-load): 18/14kN
Weight Distribution with load (F/R): 6395/875kg
Weight Distribution without Load (F/R): 1620/2650kg
Engine Model: K25
Engine Manufacturer: NISSAN
Engine Rated Power: 37.4kW/2300rpm
Max. Torque/rpm of Engine: 176.5N•m/1600rpm
Engine Displacement: 2.488L
Battery Voltage: 12V
Battery Capacity: 100Ah
Gearbox Transmission Type: Hydraulic torque converter
Gear Shift (F/R): I/I
Tyre Type: Pneumatic Tyres
Tyre Model – Front: 28x9-15-14PR
Tyre Model – Rear: 6.5-10-10PR
Fork Dimension: 45x125x1070mm
Overall Length (Without Fork): 2770mm
Overall Width: 1225mm
Overall Height Mast Extended: 4225mm
Overall Height Mast Lowered: 2070mm
Overall Height Overhead Guard: 2160mm

Note:
1. Technical specifications are for standard models only.
2. Other optional accessories, functions and requirements are available upon request.
3. All specifications and design characteristics are subject to change without prior notice.